Disclaimer

[Product information]
About smoke lenses
In the case of smoke lens type LED tail lamps, the surface of the lens may appear white when the LED lights up, but this is a phenomenon unique to smoke lenses and is not an abnormality.

●Flooded lens
The headlamp and tail lamps are not sealed to ventilate the air inside. This is to let the heat generated from the lamp escape and keep the interior of the lamp in an optimal environment.
The inside of the headlamp is not sealed, so if it rains for a long time or is humidity, the inside may condense and the lens may fog, but this is not an abnormality. Leave it for a while and the cloudiness will disappear.

About lens coating
The headlamp lenses are coated. Although it maintains a certain level of weather resistance, the coating may peel off if intentionally rubbed hard, polished or pressure washed.
In this case, deterioration symptoms such as yellowing and cracking may occur on the surface of the lens.

●Material of the main body
The main body is made of ABS resin, and the lens part is made of polycarbonate or acrylic resin. It is easy to crack, so do not hit or drop it on hard objects.
Also, the lens part is easily scratched, so do not wipe it with a dry cloth.

●Vehicle errors
Compared to the original, there may be a gap error of several mm between the body and the headlamp, but this is due to vehicle body errors and installation errors, so this is not an abnormality.

●Please note that the appearance, specifications, prices, production, etc. of the product may be changed or discontinued without notice.


[Regarding daily care]

●When installed on a vehicle, rinse off any dirt on the surface with water or wipe it off with a soft cloth wet.
●Do not use chemicals such as thinners and organic solvents as they can damage the product.
●Please wash your car by hand. Do not perform high-pressure cleaning as it may cause water leaks.
●Do not intentionally apply strong water flow to the gap between the body and the headlamp. [Things to be protected]
●In order to ensure safe operation of cars, the color and brightness of each light is detailed in accordance with the safety standards of the Road Transport Vehicle Act.
Never modify the lighting color or brightness.
*Modified products are not covered by the warranty.

●Before you operate the car, make sure all lights are operating properly.

●After the installation process is complete, make sure all lights operate properly.

●Please keep the original lights removed in a safe place.


[Conformance to safety standards]
●Products with E-mark obtained are designed to meet safety standards, but depending on the settings stated in the instruction manual, they may not conform to safety standards, so please use them in a compliant setting.
Also, since the lighting conditions are different from the original, some inspectors may occasionally deem incompatible. The vehicle's condition, battery voltage drop, etc. may cause the battery to not conform to safety standards.